Pass/fail was the main device UI signal, but operators need
the agent's observed value. Expose a formatted value per
check, show current postures on the device page, and replace
the Postures tab with paginated report history grouped by
agent push time. Status stays in the model for later rulesets.
Signed-off-by: Ludovic Vielle <ludovic@probo.com>
Expose AUDIT_START_DATE and AUDIT_END_DATE on AuditOrderField
so list queries can paginate like valid_from and valid_until.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Match valid_from and valid_until on audits and the console
date-only inputs for audit start and end.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Store audit_start_date and audit_end_date as TIMESTAMP WITH
TIME ZONE. Alphabetize n8n audit field collections to satisfy
n8n-node lint.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
ISO audits often span a window distinct from certificate validity.
Store optional audit_start_date and audit_end_date on the audit
record and expose them through GraphQL, MCP, CLI, n8n, and console.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Configure Mermaid to suppress its built-in error renderer in both
interactive UI previews and generated document HTML. Render failures now
surface through the product toast flow with a safe inline fallback instead
of leaving raw Mermaid diagnostics in the document body.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Émile Ré <nemile.re@gmail.com>
Move MagicLinkHandler out of oidc_handler.go. Completing a
magic link for an existing identity now marks the address
verified, matching OIDC behavior.
Signed-off-by: Émile Ré <emile@probo.com>
Resend only runs after an explicit form submit, so a per-address
cooldown is unnecessary overhead compared with forgot-password.
Signed-off-by: Émile Ré <emile@probo.com>
Add a per-address confirmation-email cooldown and disable the
resend/forgot-password submit buttons while the mutation is in
flight so callers cannot flood the mail queue or double-submit.
Signed-off-by: Émile Ré <emile@probo.com>
Unverified password identities were able to open sessions after
signing out. Reject sign-in with EMAIL_NOT_VERIFIED and add a
resend-confirmation flow so users can complete verification.
Signed-off-by: Émile Ré <emile@probo.com>
Add blank lines around the dedup-and-connector-ID block to satisfy
the wsl_v5 linter (blank line after an if-block, above an assignment
following a block, and above an if with no shared variables in the
preceding line).
Signed-off-by: Bryan Frimin <bryan@probo.com>
MergeByCampaignID joined access_review_sources directly from coredata
to resolve live sources, so unrecognized or out-of-scope IDs were
silently dropped instead of erroring, and in the worst case (every ID
invalid) the NOT MATCHED BY SOURCE clause deleted every existing
campaign source. The syncCampaignSources ErrResourceNotFound check
was therefore unreachable dead code.
Add AccessReviewSources.LoadByIDs, matching the existing scoped
LoadByIDs pattern (id = ANY(@ids) plus a resolved-count check), and
have CreateCampaign, AddCampaignSource, and syncCampaignSources
resolve and validate sources up front. MergeByCampaignID now takes
the already-loaded sources and builds its desired-state CTE from an
unnest() of their values instead of joining access_review_sources,
keeping the merge inside the campaign-source entity boundary.
Signed-off-by: Bryan Frimin <bryan@probo.com>
Report access loads are already tenant-scoped; reject the
extra organization guard. Also remove the PortalAccessRequest
doc comment called out in review.
Signed-off-by: Émile Ré <emile@probo.com>
The single-resource access resolvers each forward exactly one hard-coded
id, so RequestPortalAccess never returns ErrNoAccessTargets on those
paths — it only does so when all three id slices are empty. Remove the
three dead handlers, keeping the live one on the bulk path where the
resolved id slices can legitimately all be empty.
Signed-off-by: Émile Ré <emile@probo.com>
Drop the request-all shortcut so callers always name the
documents, reports, and files to request. TopBar Get Access
now only signs in; bulk selection is the multi-resource path.
Signed-off-by: Émile Ré <emile@probo.com>
Visitors could only request access to one document, report, or file at
a time. Add row checkboxes and a bottom selection toolbar to the
compliance portal documents page so a visitor can select several rows
and request access to all still-locked ones in a single round-trip.
Expose a selection-scoped requestAccesses mutation that forwards the
chosen id lists to the existing RequestPortalAccess service (one
transaction, one NDA/auth gate). The resolver loads and tenant-checks
every target before requesting so a foreign id is rejected before any
access row is written, and echoes the affected nodes so the client
flips each row to pending in place.
Add a styled Base UI Checkbox to the v2 kit, a local selection context
shared by the independent row fragments, and mirror the new selection
strings across all locales.
Signed-off-by: Émile Ré <emile@probo.com>
Declare AccessReviewSource before LoadByID so the package compiles
after RemoveCampaignSource cleanup.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Remove local uniqueGIDs helper in favor of the existing gid set
utility used elsewhere in coredata.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Scoped rows in the MERGE desired_sources CTE already limit
snapshots to sources visible under the scoper.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Remove early return on empty source IDs; count and MERGE always
run so clearing sources uses NOT MATCHED BY SOURCE delete.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Delete scoped snapshots in one statement when the desired source
set is empty; validate and merge only when IDs are present.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Add AccessReviewCampaignSources.MergeByCampaignID and use it from
syncCampaignSources instead of per-row load, upsert, and delete.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Apply draft and lifecycle checks on loaded coredata records
directly in the campaign service.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Introduce accessreview.Campaign with draft/deletable predicates and
operation-specific client errors. Drop errUnlessDraftCampaign and
status-to-sentinel switches in the service layer.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Business-layer errors carry the access review campaign GID in
Error() and match GraphQL sentinels via Is().
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Remove status-to-error helpers and map loaded campaign data to
accessreview sentinels at each business rule instead of wrapping
coredata status values.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Return GraphQL invalid when cancel hits completed or cancelled
campaign status sentinels from the service layer.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Drop CampaignStatusError from errors.go and map coredata status to
client errors in the service layer only. Cancel on terminal statuses
uses the same sentinels instead of fmt status strings.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
List campaign status sentinels explicitly at resolver AnyOf
call sites instead of a shared slice.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Centralize errors.Is OR chains in access review campaign resolvers
and expose CampaignStatusErrors for the four non-draft status
sentinels.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Replace ErrCampaignCannotStart and ErrCampaignCannotUpdate with
sentinels per campaign status, mapped through CampaignStatusError
and wrapped with operation-specific fmt.Errorf prefixes.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Use ErrCampaignCannotStart and ErrCampaignCannotUpdate with clear
actionable messages instead of a generic draft-status sentinel
wrapped in noisy fmt.Errorf chains.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
The failure is about unconfigured campaign sources, not an empty UI
selection.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Drop ErrCampaignSourceOrganizationMismatch. When a source ID is
missing or belongs to another organization, return
coredata.ErrResourceNotFound so clients get a generic not-found
response instead of leaking cross-organization details.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Align the sentinel name with the validation it represents.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Follow the cookiebanner pattern: grouped var Err* sentinels in the
service package, wrapped with fmt.Errorf where context is needed, and
explicit errors.Is checks in GraphQL resolvers.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Introduce sentinel and structured errors for access review campaign
validation failures, and map them to INVALID in GraphQL resolvers via
errors.Is rather than matching error message prefixes.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Replace the separate Add Source operation with multi-select source
fields on create and update. Create passes accessReviewSourceIds to
the existing GraphQL input; update gains the same omittable field and
backend source sync so workflows can configure sources in one step.
Load source options from the organization in the n8n UI, and keep
surfacing INVALID errors when start fails for missing sources.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Campaigns cannot be started without at least one scope source, but the
n8n node had no way to attach sources after creation. Expose the
addAccessReviewCampaignSource mutation as an Add Source operation so
workflows can configure sources before starting.
Return INVALID instead of INTERNAL when start fails due to missing
sources or invalid status, so n8n surfaces the real error message.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Makes it practical to find people in larger orgs across GraphQL, MCP, CLI, and n8n, with page size raised to 100.
Signed-off-by: Sacha Al Himdani <sacha@probo.com>
Failed OIDC, magic-link, and SAML sign-ins sent users to /auth/error
without the post-login destination, so Sign in dropped OAuth flows
and deep links. Propagate a validated continue query through auth
error redirects, recover it from OIDC state when the IdP denies or
cancels login, and forward it from AuthErrorPage to /auth/login.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
account/list marks the contract's primary account "main" on the live
API, not "mymain" as the published docs example shows, so matching the
documented spelling reported every account as a non-admin, including
the contract owner. Roles cannot stand in: a main account carries the
same technical/billing values a sub-account can hold. Classify off
"sub" instead, the one value the docs and the API agree on.
The fixture copied the docs example, so the test passed on the same
wrong assumption. Its bodies now mirror a live capture, anonymized: the
main account carries no main_account or allow_gui, sub-accounts add
them plus the access lists, and the primary account's type is "main".
A table test pins both spellings.
A review keys accounts on email plus external ID. Email came only from
account/details, and any failure blanked it while still emitting the
record, so a transient 5xx moved an account to a different key and
surfaced it as one account removed and another added. Only the stable
answers now degrade: UpCloud returns 403 ACCOUNT_FORBIDDEN, not 404,
for an account outside the token's reach, and both keep the list-only
fields. Anything else aborts the run.
A blank username no longer discards every account already collected,
matching the sibling drivers.
Resolve the source name from GET /1.3/account so sources read
"UpCloud <username>" rather than staying generic, and link the
connector to its documentation page.
Signed-off-by: Aurélien Sibiril <81782+aureliensibiril@users.noreply.github.com>
