Add blank lines around the dedup-and-connector-ID block to satisfy
the wsl_v5 linter (blank line after an if-block, above an assignment
following a block, and above an if with no shared variables in the
preceding line).
Signed-off-by: Bryan Frimin <bryan@probo.com>
MergeByCampaignID joined access_review_sources directly from coredata
to resolve live sources, so unrecognized or out-of-scope IDs were
silently dropped instead of erroring, and in the worst case (every ID
invalid) the NOT MATCHED BY SOURCE clause deleted every existing
campaign source. The syncCampaignSources ErrResourceNotFound check
was therefore unreachable dead code.
Add AccessReviewSources.LoadByIDs, matching the existing scoped
LoadByIDs pattern (id = ANY(@ids) plus a resolved-count check), and
have CreateCampaign, AddCampaignSource, and syncCampaignSources
resolve and validate sources up front. MergeByCampaignID now takes
the already-loaded sources and builds its desired-state CTE from an
unnest() of their values instead of joining access_review_sources,
keeping the merge inside the campaign-source entity boundary.
Signed-off-by: Bryan Frimin <bryan@probo.com>
The loader fetched only the first 500 sources with no pageInfo/cursor
follow-up, so organizations with more than 500 scoped sources could
not select sources past the first page when creating or updating a
campaign. Loop over pages using pageInfo.endCursor until exhausted.
Signed-off-by: Bryan Frimin <bryan@probo.com>
Intl.DisplayNames rejects the GLOBAL pseudo-region, so label
resolution now handles it explicitly before rendering the picker.
Signed-off-by: Sacha Al Himdani <sacha@probo.com>
Report access loads are already tenant-scoped; reject the
extra organization guard. Also remove the PortalAccessRequest
doc comment called out in review.
Signed-off-by: Émile Ré <emile@probo.com>
The single-resource access resolvers each forward exactly one hard-coded
id, so RequestPortalAccess never returns ErrNoAccessTargets on those
paths — it only does so when all three id slices are empty. Remove the
three dead handlers, keeping the live one on the bulk path where the
resolved id slices can legitimately all be empty.
Signed-off-by: Émile Ré <emile@probo.com>
The bar read the raw selection size for its count, so after a request
succeeded and Relay flipped the rows to pending the left count stayed
stale while the action count dropped to zero. Resolve the selection
against the current rows instead, so requested rows leave the count at
once and the bar closes without depending on a clear that may not run.
Signed-off-by: Émile Ré <emile@probo.com>
Drop the request-all shortcut so callers always name the
documents, reports, and files to request. TopBar Get Access
now only signs in; bulk selection is the multi-resource path.
Signed-off-by: Émile Ré <emile@probo.com>
The bulk request skips any id that already has an access record, so
rejected or revoked rows reported success while creating nothing. Treat a
row as requestable only when the viewer is unauthorized and no access
record exists yet, keeping the selection CTA count honest.
Signed-off-by: Émile Ré <emile@probo.com>
The toast viewport stays mounted even with no toasts, as a fixed box in
the bottom-right corner. With default pointer-events it swallowed hover
and clicks over content beneath it, such as the lower edge of a bottom
action bar's right-aligned buttons.
Mark the viewport pointer-events-none and re-enable events on each toast
root so only actual toast cards are interactive.
Signed-off-by: Émile Ré <emile@probo.com>
The bottom selection action bar carried its layout as inline class
strings on the container divs. Move them into a slotted tv in the
documents variants module, matching the documentsLayout pattern, so the
component consumes named slots instead of ad hoc className literals.
Signed-off-by: Émile Ré <emile@probo.com>
Public / already-authorized and already-requested rows could be ticked
even though they never contribute to "Request Access (N)", making the
selection count look inconsistent with the CTA. Restrict selection to
locked rows: their checkbox is disabled otherwise, and "Select all" now
picks only the lockable rows.
Signed-off-by: Émile Ré <emile@probo.com>
Visitors could only request access to one document, report, or file at
a time. Add row checkboxes and a bottom selection toolbar to the
compliance portal documents page so a visitor can select several rows
and request access to all still-locked ones in a single round-trip.
Expose a selection-scoped requestAccesses mutation that forwards the
chosen id lists to the existing RequestPortalAccess service (one
transaction, one NDA/auth gate). The resolver loads and tenant-checks
every target before requesting so a foreign id is rejected before any
access row is written, and echoes the affected nodes so the client
flips each row to pending in place.
Add a styled Base UI Checkbox to the v2 kit, a local selection context
shared by the independent row fragments, and mirror the new selection
strings across all locales.
Signed-off-by: Émile Ré <emile@probo.com>
Declare AccessReviewSource before LoadByID so the package compiles
after RemoveCampaignSource cleanup.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Remove local uniqueGIDs helper in favor of the existing gid set
utility used elsewhere in coredata.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Scoped rows in the MERGE desired_sources CTE already limit
snapshots to sources visible under the scoper.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Remove early return on empty source IDs; count and MERGE always
run so clearing sources uses NOT MATCHED BY SOURCE delete.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Delete scoped snapshots in one statement when the desired source
set is empty; validate and merge only when IDs are present.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Add AccessReviewCampaignSources.MergeByCampaignID and use it from
syncCampaignSources instead of per-row load, upsert, and delete.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Apply draft and lifecycle checks on loaded coredata records
directly in the campaign service.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Introduce accessreview.Campaign with draft/deletable predicates and
operation-specific client errors. Drop errUnlessDraftCampaign and
status-to-sentinel switches in the service layer.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Business-layer errors carry the access review campaign GID in
Error() and match GraphQL sentinels via Is().
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Remove status-to-error helpers and map loaded campaign data to
accessreview sentinels at each business rule instead of wrapping
coredata status values.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Return GraphQL invalid when cancel hits completed or cancelled
campaign status sentinels from the service layer.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Drop CampaignStatusError from errors.go and map coredata status to
client errors in the service layer only. Cancel on terminal statuses
uses the same sentinels instead of fmt status strings.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
List campaign status sentinels explicitly at resolver AnyOf
call sites instead of a shared slice.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Centralize errors.Is OR chains in access review campaign resolvers
and expose CampaignStatusErrors for the four non-draft status
sentinels.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Replace ErrCampaignCannotStart and ErrCampaignCannotUpdate with
sentinels per campaign status, mapped through CampaignStatusError
and wrapped with operation-specific fmt.Errorf prefixes.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Use ErrCampaignCannotStart and ErrCampaignCannotUpdate with clear
actionable messages instead of a generic draft-status sentinel
wrapped in noisy fmt.Errorf chains.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
The failure is about unconfigured campaign sources, not an empty UI
selection.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Drop ErrCampaignSourceOrganizationMismatch. When a source ID is
missing or belongs to another organization, return
coredata.ErrResourceNotFound so clients get a generic not-found
response instead of leaking cross-organization details.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Align the sentinel name with the validation it represents.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Follow the cookiebanner pattern: grouped var Err* sentinels in the
service package, wrapped with fmt.Errorf where context is needed, and
explicit errors.Is checks in GraphQL resolvers.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Introduce sentinel and structured errors for access review campaign
validation failures, and map them to INVALID in GraphQL resolvers via
errors.Is rather than matching error message prefixes.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Replace the separate Add Source operation with multi-select source
fields on create and update. Create passes accessReviewSourceIds to
the existing GraphQL input; update gains the same omittable field and
backend source sync so workflows can configure sources in one step.
Load source options from the organization in the n8n UI, and keep
surfacing INVALID errors when start fails for missing sources.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Campaigns cannot be started without at least one scope source, but the
n8n node had no way to attach sources after creation. Expose the
addAccessReviewCampaignSource mutation as an Add Source operation so
workflows can configure sources before starting.
Return INVALID instead of INTERNAL when start fails due to missing
sources or invalid status, so n8n surfaces the real error message.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
Makes it practical to find people in larger orgs across GraphQL, MCP, CLI, and n8n, with page size raised to 100.
Signed-off-by: Sacha Al Himdani <sacha@probo.com>
Bump postcss to 8.5.23 and react-router to 8.3.0 to clear their high-severity advisories. Leave nested brace-expansion issues for a follow-up that won't break older minimatch consumers.
Signed-off-by: Sacha Al Himdani <sacha@probo.com>
Findings create and update views filtered out RISK_ACCEPTED
even though the API requires a linked risk for that status.
Restore the option, collect riskId via a searchable paginated
picker, and clear stale links when status changes.
Signed-off-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Bryan FRIMIN <bryan@frimin.fr>
